Speedlite Head and Bare-Bulb Head

The speedlight head outputs the standard look of an on-camera flash that can be modified using an optional softbox, beauty dish or umbrella.

The bare bulb head features a removable flash tube and produces 360 degrees of soft, bright, nearly shadowless light. The head uses optional reflectors that focus the beam angle and give you directional control.

Built-in 2.4G wireless X system

Compatible Cameras under Radio Transmission (as slave unit): Nikon cameras (X1N as master unit); Cannon Eos cameras (X1C as master unit); Sony cameras (X1S as master unit); Fujifilm cameras (XIT-F as master unit); Olympus & Panasonic camera (X1T-O as master unit);

Large Capacity Lithium Battery Pack

The Removal rechargeable lithium battery Offers 500 Full Power Flashes with 0.01 to 1.8 sec. Recycling, 200Ws of Power Adjustable in 9 Steps from 1/256 to 1/1.

Large AV Panel

High-Quality and Clear AV Panel Offers Convenient Operation. There is a thin protective film on the LED panel, please tear the film off after confirming that there is no problem with products.

Manual/TTL/Multi Flash Modes

The AD200 pro has 3 flash modes: Manual, TTL, and Multi Stroboscopic. Manual outputs the user’s choice of power, modeling light, first or second curtain sync, etc. Multi controls the stroboscopic rate up to 90 times (90 Hz). TTL takes advantage of the flash head’s built-in X1 receiver.

Stable color temperature

Stable color temperature at 5600±100K over the entire power range.

1/4″ Threaded Mounting Hole

The AD200 pro can be mounted via a 1/4″ 20 threaded mounting hole on either side of the flash (allowing landscape or portrait orientation when using the speedlite head)

Front/ Rear Curtain sync

Support Front/ Rear Curtain sync, will create trailing smear effect. Multi controls the stroboscopic rate up to 90 times (90 Hz).

Lightweight & Portable

Lightweight and Pocket Size, Great Portability.